Zhuniu Formwork Systems

Zhuniu Formwork Systems Zhuniu Formwork System-lighter.smarter.cost-effective. The Pioneer & Leader of Lightweight Concrete Formwork.

Manual, Reusable & Fully Customizable Building Solutions.

I cannot stop others from lowering their quality standards, but Zhuniu Formwork will never do that, never.
17/08/2026

I cannot stop others from lowering their quality standards, but Zhuniu Formwork will never do that, never.

14/08/2026

L-Shaped Wall Installation Process | Light Steel Formwork

Step 1: Site Preparation

Clean the foundation surface, ensure it is flat and level. Mark the exact L-shaped wall position according to the construction drawing.

Step 2: Place L-Shaped Corner Connector

Set the light steel corner angle at the right-angle turning position of the wall. Align it accurately with the marked line to ensure perfect 90° vertical angle.

Step 3: Install Wall Panels & Fix with Pins

Place the light steel formwork panels on both sides of the corner.
Align the panel holes with the holes on the corner connector.
Insert steel pins through the reserved holes to lock the panels and corner part tightly.

Step 4: Complete L-Shape Assembly

Repeat the pin-fixing method for all connection points.
The two-direction wall panels are firmly connected into a standard 90-degree L-shaped wall formwork system.

Step 5: Vertical Check & Reinforcement

Check verticality with a level tool.
All pin connections are double-checked to ensure no loose points before concrete pouring.

Step 6: Concrete Pouring & Formwork Stripping

Pour concrete evenly.
After concrete hardening (24–36 hours for wall), remove all pins and disassemble the light steel formwork for repeated use.

Product Advantages (for ending caption)

✅ Simple pin connection, no heavy accessories
✅ Fast L-shape corner assembly
✅ Perfect 90° wall angle
✅ Reusable hundreds of times
✅ Light weight, save labor cost


10/08/2026

Zhuniu plastic concrete formwork is tailor-made for drainage ditch projects.
Ultra-light panels simplify manual carrying and fast flexible assembly.
Durable structure supports more than 50 repeated uses, lowers frequent material replacement expenses.
Ideal for residential, road and municipal ditch construction!

07/08/2026

We prefer to cooperate with partners who value long‑term business development.
Partners that only prioritize unit price while ignoring overall product value are unlikely to build sustainable business in the long run.

04/08/2026

🔥Zhuniu new production line online!
We just launched new production line for PP hollow plastic concrete formwork.
Zhuniu maximum monthly production capacity now reaches 150,000 square meters.

Stable output, consistent quality, fast lead‑time for large‑volume orders.
Reusable PP hollow formwork, perfect for walls, columns, beams, slabs and culvert projects.

Message us for catalog & quotation!


ConstructionSupply FactoryDirect FormworkSystem

04/08/2026

🔥Zhuniu new production line online!
We just launched new production line for PP hollow plastic concrete formwork.
Zhuniu maximum monthly production capacity now reaches 150,000 square meters.

Stable output, consistent quality, fast lead‑time for large‑volume orders.
Reusable PP hollow formwork, perfect for walls, columns, beams, slabs and culvert projects.

Message us for catalog & quotation!


31/07/2026

Zhuniu Plastic Formwork Integrated Construction Process for Beam & Slab

Zhuniu plastic concrete formwork supports one-piece integrated construction for floorslab and beam structures.

First, by handles use external corner connectors to splice the plastic panels to form the exact beam size and shape according to the construction drawing.

After the beam frame is fully shaped, use internal corner connectors to seamlessly connect the beam formwork with the floor slab formwork.

This integrated beam-and-slab connection method requires no cutting, no plywood splicing, greatly speeds up on-site assembly, ensures perfect structural integrity, and produces smoother concrete finished surfaces.

29/07/2026

Super Easy Plastic Formwork Installation! Zhuniu plastic formwork measures 1500mm × 500mm and weighs only 10.25kg. One person can carry and install it easily, saving tons of time and labor on construction sites.
No heavy tools, no complicated steps! 3 simple installation steps for perfect concrete forming👇
Step 1: Splice Formwork to Required Size
Connect formwork panels with dedicated handles. Splice and adjust the panels to match your project’s required size for a neat, tight frame.
Step 2: Install Plastic Sleeves & Through-Wall Rods
Install plastic sleeves on the spliced formwork toprecisely control concrete thickness. Then thread through-wall rods through the sleeves to fix the formwork in place.
Step 3: Reinforce & Tighten
Reinforce the outer side with square steel pipes to resist concrete pressure and avoid deformation. Finally, tighten the nuts firmly. Done!
Why Choose Zhuniu plastic Formwork?
✅ Lightweight: 13.6kg/m², single-person operation
✅ Fast installation: 3 simple steps, high efficiency
✅ High accuracy: Consistent concrete thickness
✅ Stable & durable: Anti-deformation with steel pipe reinforcement
Ideal for all kinds of concrete construction projects! Upgrade your building formwork now.

29/07/2026

Super Easy Plastic Formwork Installation!
Zhuniu plastic formwork measures 1500mm × 500mm and weighs only 10.25kg. One person can carry and install it easily, saving tons of time and labor on construction sites.
No heavy tools, no complicated steps! 3 simple installation steps for perfect concrete forming👇
Step 1: Splice Formwork to Required Size
Connect formwork panels with handles. Splice and adjust the panels to match your project’s required size for a neat, tight frame.
Step 2: Install Plastic Sleeves & Through-Wall Rods
Install plastic sleeves on the spliced formwork toprecisely control concrete thickness. Then thread through-wall rods through the sleeves to fix the formwork in place.
Step 3: Reinforce & Tighten
Reinforce the outer side with square steel pipes to resist concrete pressure and avoid deformation. Finally, tighten the nuts firmly. Done!
Why Choose Zhuniu Plastic Formwork?
✅ Lightweight: 13.6kg/m², single-person operation
✅ Fast installation: 3 simple steps, high efficiency
✅ High accuracy: Consistent concrete thickness
✅ Stable & durable: Anti-deformation with steel pipe reinforcement
Ideal for all kinds of concrete construction projects! Upgrade your building formwork now.

28/07/2026

This video shows the standard construction method for ditch concrete pouring using Zhuniu lightweight plastic formwork and beam clamps, simple, fast and high precision for channel and drainage ditch projects.

Step 1: Assemble and adjust the formwork height

First, assemble the plastic formwork panels according to the designed ditch depth. Adjust and fix the formwork height to ensure the overall flatness, verticality and dimension accuracy of the ditch formwork. Complete the whole ditch formwork enclosure as required before the next procedure.

Step 2: Install middle partition boards

Install fixed partition boards in the middle of the assembled formwork. The partition plates effectively support the formwork, prevent bulging and deformation during concrete pouring, and guarantee consistent internal width and regular ditch shape.

Step 3: Reinforce with two types of beam clamps

After formwork assembly and partition installation, use special beam clamps for overall reinforcement. We provide two optional fixing structures for different construction habits:

1. Screw-type beam clamp
Fixed by tightening bolts with an electric wrench. It features firm locking, adjustable tightness, reusable performance and strong overall stability, suitable for high-standard engineering projects.

2. Pin-type quick beam clamp
Fixed by inserting safety pins directly without tools. This type is ultra-fast to install and dismantle, greatly saves construction time and improves on-site working efficiency.

Both beam clamps perfectly cooperate with plastic formwork systems, effectively resist concrete lateral pressure, ensure no deformation, no leakage, and produce smooth finished ditch walls.
Noted: beam clamps usually used ditch height ＜600mm;

Address

罗庄区鲁南工业品采购中心4L
Linyi
276000

Telephone

+8618054533152

Website

,

Alerts

Be the first to know and let us send you an email when Zhuniu Formwork Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Zhuniu Formwork Systems:

Shortcuts

Share

Category