Construction funda

01/01/2025

हैप्पी न्यू ईयर टू ऑल माय सब्सक्राइबर मैं आपसे आज एक चीज साझा करना चाहता हूं की मैं इस वर्ष इस पेज के माध्यम से लेबर रेट जगह-जगह में क्या-क्या चल रहे हैं उसकी एक लिस्ट तैयार की जाए और अपने भाई बंधु जो इस लाइन में लगे हैं उनको एक मार्गदर्शन किया जाए ताकि सब गरीब से गरीब इंसान अपने सपनों का शहर बसा सके और अपने करीबियों को कहीं दूर जाने से अच्छा है अपने आसपास में ही कहीं काम मिल जाए और अपने परिवार को वक्त दे सके यह मेरा इस पेज को बनाने का मकसद रहा है

09/08/2024

Important points for finishing (plaster)

16/07/2024

here is some technique to overcame defect faced during finishing (plastering) work.

crazing means hair like cracks develop in plaster seen when putty coat is applied over it.

Crazing results from differential shrinkage of the surface of the
rendering in relation to its interior. The cracks formed are narrow
and generally do not extend far below the surface; they may, however,
develop into shrinkage cracks. Dense, steel trowelled finishes are
particularly liable to craze; on the other hand, a porous mix, with a
scraped, textured, or other rough finish is highly resistant to this
defect.
The risk of crazing may be minimized by:
a) the use of relatively weak mix for the finishing coat,
b) the avoidance of an excessive proportion of very fine material
in the finish coat, and
c) the avoidance of excessive trowelling to prevent the drawing to
the surface of an excess of laitance.

16/07/2024

Some input for finishing work.

04/10/2019

Important tips🏫🏠🏤::

Generally people confused about in buying cement...Because of availability of different brands prevail in market....

1) see 1st thing is all cement is same in market because company is selling their product after getting all important approval by different govt department, gone through various test by specialised engineer of this field..

2) 2nd thing is its upto the customer how much budget they afford for it..

3) 3rd is how customer is fascinated by advertisement for particular cement...

Some technical terms ::

1) cement availble in market in 33grade,43 grade, 53grade only..

And in normal residential work 43 grade of portland pozzolona cement is used.... Here 43 is specified for strength that is 43N/mm^2

2) cement should be grey and lump free..
3) if one should poured his hand in cement beg they should feel cold.
4) if cement is poured in water they should not float over water surface for a long time. If floating it means adultration in cement
5) fine ness is so important in cement to check it pick some amount of cement and rubb this in b/w finger you feel the fineness..

Last important thing is...
1) manufacturing date is so important older the cement, lesser is the strength... If MFG DATE IS 3 month back cement losses 50%strength.. So keep all this thing in mind while purchasing cement..

26/09/2019

Painting@work🏠🏤🏫:

Right way to paint your dream house some important tips:-

1) Ask for your painter for before applying 1st coat surface should clean suffcient to apply coat gently.
2) putty is available in market with different name but the work are same bcoz prevailing company have passed all important test before sell their product in market, so choose wisely according to your pocket.
3) Atleast two coat must be applyed to get uniform and level surface with perfection.
4) After that rubbing is important asked for painter do it properly usually worker don't..
5)After getting lean surface then after allow your painter to apply primer(liquid form)
6) primer is important to cover your surface with an thin plastic film over surface..
7) Then after ask for painter to apply 1st coat of desired paint. And after 2 coat of paint mostly desired surface is found.. Rare chances to apply 3 coat where plaster condition are differents.

20/08/2019

One more important concept of construction line... Is concreting, widely used in all civil works so lets begin to know what is it... A mixture of cement, fine aggregate( sand) , coarse aggregate(rodii) and water called concrete.... Now most important thing which is known by every client that.... About various proportion used in various part of super structure, like in beam, coloum, pcc, rcc etc all...... For pcc which is popularly known as (gatta) in local languages.... Ratio is 1:5:10 means concrete mix is made by one beg of cement, 5 time more sand than cement, 10 time more( roddi) than cement.... With suitable amount of water... Make sure mix is not so liquidity form it should be in harsh form..... This gives your foundation more strength and compact base.... Because pcc is good for bearing compressive strength thats why it is provided over subgrade to form a base for foundation......

29/07/2019

26/07/2019

To prevent moisture coming from earth which is a major problem faced by every one while building any construction work...... A technical term DPC( damp proofing course) which is an layer of an concrete with an admixture in ratio of 1:4:8 concrete mix with thickness 2-3inch sufficent for making a rigid base over plinth level to stop moisture coming up to building...so owner make sure about this tip to make moisture free house...

05/07/2019

Brick is second most important component in structure........but due to lack of knowledge about brick one should prefer for concrete block that is company tested and fixed in presence of technical engineer...

05/07/2019

Foundation is main components in any type of structure... This divided into two type = shallow foundation
Deep foundation

It depend on geographical condition of area where u want to build your house... Mainly for independent house shallow foundation is preferred......