Bedon General Contractors ltd

23/10/2025

14/10/2025

steel fixing.. quality is our theme

14/10/2025

All construction works,Best quality & economical.. contact us

14/10/2025

Damaris Wa Dama Spares Original, kindly am brother from another mother.... Market my work.... just request

14/10/2025

clean services on high rise apartments, painting, renovation etc..contact us

28/09/2025

THE DEPTH OF YOUR FOUNDATION, WHAT DETERMINES...

Many people believe the depth of a foundation is just about "digging deep so the house will be strong," but it's more technical than that. The truth is, the depth of your foundation is determined by soil condition,building design, and load, not by guess work.

The first thing that determines depth is soil type. If the soil is firm and stable (like laterite or gravel soil), the foundation may not need to be extremely deep. But if the soil is loose, sandy, or waterlogged, the foundation must go deeper until you reach a stronger layer that can safely carry the building load. A soil test or at least an experienced engineer's inspection will guide this decision.

Second is the type of building and its weight. A bungalow doesn't need the same depth as a two-storey duplex. The heavier the structure, the deeper and stronger the foundation must be to distribute the weight safely without settlement or cracking.

Third is the water table. If groundwater is high, the foundation must go below the level where water can weaken it, or special reinforcement and concrete work must be done to resist moisture and pressure.

Fourth is the climate and environment. In flood-prone areas or regions with heavy rainfall, engineers often dig deeper or use special foundation designs to protect against erosion, flooding, and long term soil movement.

This is why a professional site engineer or structural engineer must inspect your land before setting out the foundation. Digging too shallow may lead to cracks,sinking floors, or even collapse in the future. Digging unnecessarily deep increases cost without adding real value.

The perfect foundation depth is not about "how deep your neighbour went" but about what your soil and structure demand. Proper testing, accurate design,and supervision will save you from wasting money and protect your building.

28/09/2025

THE HIDDEN REASONS YOUR PAINT NEVER LASTS (AND HOW TO FIX THEM)

If you’ve ever repainted a house and watched the walls start peeling, bubbling, or fading too soon, you’re not alone. The problem isn’t always the painter, it’s usually what happened before the first brush touched the wall.

Here are 5 major culprits:

1. Trapped Dampness
When you skip oversight concrete and proper damp proofing this is likely to occur in your building. leaking pipes, or uncured walls are silent killers.

2. Bad Plastering Sand
Using salty or dirty sand for plastering weakens the wall surface. When paint is applied, it can’t bond properly and will soon flake off.

3. Painting Too Early
Fresh plaster needs time to dry. Rushing to paint on a wet or cracked surface guarantees early failure.

4. Cheap or Wrong Paint
Exterior walls need strong weather resistant products. Using low grade or indoor paint outside is money wasted.

5. No Primer, No Grip
Skipping primer is like skipping a foundation for a house. Without it, paint has nothing solid to cling to.

HOW TO GET IT RIGHT EVERY TIME:

Cure and dry your walls fully before painting.

Use clean, sharp sand for plastering to ensure a strong finish.

Repair dampness sources before you even buy paint (that's if not foundational).

Smoothen, clean, and prime the surface first.

Choose high-quality paint that matches the location.

When you follow these steps, your walls won’t just look bright after painting, they’ll keep that finish for years without constant retouching.