Detect-A-Leak, Infrared Building Inspections Ltd

25/01/2025

25/01/2025

The RIGS gutter system is a good economic solution to replace the problematic Taylor hidden gutter system

03/05/2022

Our inspections are not just about what we see through the infrared camera but also what we observe visibly during our time on site and consider at risk of causing a leak, particular in areas and places that are not easily seen or noticed by the home owner.

Winter is coming it's time to check and clear your gutters.
It's surprising how often something as simple as a blocked gutter or leaking downpipe can cause internal leaks and rising damp issues to a home.
As can be seen in the photo even gutters with leaf protection still need to be checked and cleared occasionally.

This particular type of gutter is also often problematic by design and the way they are often incorrectly fitted.

25/11/2018

Article written for local paper November 2018
Please note we no longer use the 0800 number you can call me directly on 0274 33 8328

09/07/2018

“All homes could benefit from a moisture inspection, but if your home is more than 10 years old this will greatly increase the risk of leaks.”
Why? John says most people ask: “If my home leaked surely I would know?”
But unfortunately most leaks go unnoticed until the damage is done.
“As part of our inspection we will also point out any high risk areas or moisture related maintenance issues we find so that preventative maintenance work can be done, even if they are not currently causing leaks.”
John has many years’ experience in the building industry and recently completed preventative maintenance work on his own property.
If you would like a quote or more information, give John a call on 0274 338-328. For more info go to Detect-A-Leak.co.nz

08/06/2018

(Infrared Thermal Imaging how does it work?) article written for local paper May 2018

21/11/2017

You Say: My home doesn’t leak!

We Say: Most homes we test, leak! Detect-A-Leak owner John Pope says the days of relying on a builder or even your average building inspector to find moisture and moisture related issues just doesn't cut it anymore.
Conducting moisture inspections requires specialist equipment and experience.
Don't ignore the warning signs, if you've got a leak it will normally only get worse over time.
It takes about 2-3 hours to fully moisture inspect a home for leaks and that's with an infrared camera and non-invasive moisture testing equipment. The infrared camera can see what we can’t.
Any home built prior to 2005 will often have poorly detailed or missing flashings or failing areas such as windows or cladding that can or are allowing moisture ingress.
“We can help you find the leaks that you didn't know you had, determine the cause of a leak and advise on preventive maintenance,” says John.
If you would like more information go to Detect-A-Leak.co.nz or give John a call on 0274 338 328.

27/08/2017

The Perfect Storm!
Detect-A-Leak owner John Pope says almost every home we check has leaks and most are leaking without the home owners knowledge. At some point in the life of your home it will most likely develop a leak. The best way to find out is to have an Infrared Moisture Inspection. Our equipment and experience can help find those hidden leaks so you can get them fixed, before the rot sets in. When we conduct our inspections we also endeavour to supply the customer with useful relevant information for the type of inspection. The inspection is not just about if it’s leaking, but also a lot of older homes need preventive maintenance. A number of design/build details on older homes have provided the perfect storm for leaks and should be redesigned or replaced or at the very least need regular maintenance to ensure weather-tightness.
Visit Detect-A-Leak.co.nz or call John on 0274 338 328.

10/08/2017

John Pope from detect-a-leak on a break from doing Electrical switchboard inspections in Samoa

08/10/2015

Updated the website lots of new IR pics and extra information

22/02/2015

Detect-A-Leak: Moisture meters for home moisture inspections. This video covers what you need to know when using most non-invasive and pin type moisture mete...

09/01/2015

These thermal images were taken during Infrared building inspections. The green isotherm is often used to highlight confirmed wet areas.