10/24/2026
Before you buy new construction, ask what’s under it 👇
Most builders stop at code. These homes are over-engineered.
Code is the minimum a home has to meet to pass inspection. It’s the floor, not the goal.
Width: Code says 14 to 16 inch wide footings. IM LIVIN poured 18 to 20. A wider footing spreads the weight of the house over more soil, so there’s less pressure in any one spot and less chance of uneven settling.
Rebar: Two continuous rows of #4 rebar, half-inch steel, run through every footing. Concrete is strong when it’s pressed down but weak when it’s pulled or bent. The steel holds it together, so a small crack stays small instead of spreading.
Depth: Code says 12 inches. They went 16, a full 4 inches deeper. Digging deeper gets the footing past the loose topsoil and into firmer, undisturbed ground, which is what you want carrying the weight.
A house is incredibly heavy, and every home settles a little over time. When the foundation is built like this, the risk of serious settling, cracked walls and sticking doors goes way down. You’ll never see any of it, and that’s the point.
That’s Imran with IM LIVIN walking us through it.
Four custom homes are going up on Grigsby Avenue in Holly Springs, with pricing expected under $800K, subject to change.
Want details? DM DDR Realty | Raleigh, NC the word GRIGSBY.
Builder: IM LIVIN
DDR Realty at Choice Residential