18/09/2016
JSR Tiles putting
Grout is a substance that is
-Used between tiles, natural stones and marbles etc.
-Resistant to used cleaning chemical.
-Non abrasive texture. Doesn’t scratch the tiles when cleaning after applied.
Quality is our first priority.
JSR adhesive system for laying ceramic Tiles, Stones & Marble/Granit.
Tools:
Clean cloth or sponge
Rubber Trowel.
Small bucket for mixing.
Trowel.
For
All types of exterior
and
interior putting works.
Grout Preparation:
1. To apply grout wait for 2days setting the tiles.
2. Add 33% water of the weight of grout powder (330 milliliters for 1 kg) of grout. The water should be of room temperature & potable.
3. Then add grout (1kg) gradually in the water and mix at the same time until a homogeneous lump free paste is obtained.
4. Before using the grout, wait 3-4 minutes, so that all chemicals and components react properly with water.
5. When ready, it can be applied within 2 hours but make that the mix is away from sunlight.
Mfg Date:
Exp Date:
MRP: Tk-120.
Net W/t: 1KG(±10gm)
Packaging & Marketing By
Lucky Traders
Jessore, Bangladesh.
Mob:01727690819
