All Clear Mold & Pathogen Solutions Inc.

07/30/2026

Worried about mold? Start with the right questions—not assumptions.

One of the biggest misconceptions about mold is that a quick look at visible growth tells the whole story.

Unfortunately, it doesn't.

Visible mold is only one piece of the puzzle. The cause, extent of contamination, building conditions, occupant health concerns and, in some cases, laboratory testing all play a role in determining the most appropriate recommendation.

Rather than simply looking for mold, we evaluate your home through the lens of building science and indoor environmental quality. We identify conditions that contribute to microbial growth, explain our findings, and help you understand your options.

Sometimes laboratory testing is recommended. Sometimes it isn't.

Sometimes the solution is straightforward. Sometimes further investigation is needed.

Our commitment is simple:

We'll tell you what we know, what we don't know, and what additional information—if any—is needed before making recommendations.

Because when it comes to your home and your health, assumptions aren't good enough.

If you're looking for clear, honest guidance about mold, moisture or indoor air quality, we're here to help.

The First Step Toward a Healthier Home If you're concerned your home may have mold—or you've already discovered mold and want to understand why it's there, how extensive the problem may be, and what should be done next—an Indoor Environmental Building Evaluation is the best place to start. Our e...

07/28/2026

Can one mold test tell you everything that's happening in your home?

The short answer is no.

Air samples, tape lifts, ERMI, HERTSMI, and viability testing all have an important role—but each answers a different question. Understanding the limitations of these tests is just as important as understanding the results themselves.

One of the biggest misconceptions we encounter is that a laboratory report can tell the whole story. In reality, mold testing is only one piece of the puzzle. Building science, moisture investigation, ventilation, and a thorough inspection are equally important when determining the extent of a mold problem and the best course of action.

In our latest blog, we explain:

1. The strengths and limitations of Air-O-Cell testing
2. What tape lift samples can (and can't) tell you
3. The difference between Air-O-Cell and VIA-CELL testing
4. What ERMI and HERTSMI testing actually measure
5. Why no single mold test should be used in isolation

Whether you're a homeowner, realtor, property manager, restoration professional, or simply trying to better understand mold testing, we hope this article helps separate fact from fiction.

Have you ever received mold test results and wondered what they really meant? We'd love to hear your experience or answer your questions in the comments.

When homeowners discover mold—or suspect it—they often ask the same question:"Can we test for it?"The answer is yes. In fact, there are several different types of mold tests available today. But understanding what each test is designed to tell you is just as important as the results themselves.A...

07/11/2026

REALTORS®, Property Managers & STRATA Professionals... this one's for you.

When mold becomes part of a transaction, tenant turnover, or building issue, your clients look to you for answers.

We're here to help.

At All Clear Mold & Pathogen Solutions, we offer far more than traditional mold remediation. Our patented InstaPURE™ biodecontamination technology treats the entire connected indoor environment—not just the visible mold. We also offer long-term antimicrobial protection, tenant turnover sanitization, Airbnb sanitization, post-water-loss treatments, and optional independent laboratory verification.

Even better, we'd love to share what we've learned.

We're now offering complimentary Lunch & Learn sessions (virtual or in person) for:

✔ REALTORS®
✔ Property Managers
✔ STRATA Managers
✔ Restoration Professionals
✔ Facility Managers

We'll discuss:
• Mold and indoor air quality
• Why not all fogging technologies are created equal
• The science behind patented biodecontamination
• Long-term antimicrobial strategies
• Real-world case studies
• And answer your team's questions.

No sales pressure—just practical information to help you better serve your clients.

If you'd like to schedule a Lunch & Learn, send us a message.

06/30/2026

🚗⛵ Thinking About Bringing Back Our Mold Kill Clinic! 🚐🚙
We've had quite a few people ask if we're going to offer our Mold Kill Clinic again, and we're considering bringing it back—but only if there's enough interest.

If your car, truck, SUV, camper van, RV, boat, or travel trailer has developed a musty smell or visible mold from our wet coastal climate, this is an opportunity to have it professionally treated at approximately 50% off our regular on-site pricing.

Our patented, non-toxic biodecontamination technology destroys mold, bacteria, and viruses while helping restore a healthier indoor environment—without the use of harsh chemicals.

Estimated Clinic Pricing:

🚗 Cars, Pickups, SUVs & Minivans – approximately $245 + GST
🚐 Camper Vans, RVs & Boats – approximately $425 + GST and up

📍 Location: Powell River (date and location to be announced)

At this point we're simply building an interest list. If enough people sign up, we'll schedule a clinic and contact everyone with the details.

👉 If you'd like to be notified, simply:
Comment "Interested" below, or
Send us a private message with what you'd like treated (vehicle, boat, RV, etc.).

Please feel free to share this post with anyone who might be interested!

Important: If you are mold-sensitive or dealing with significant visible mold, we recommend not disturbing or attempting to clean the mold before treatment, as this can release additional spores into the air. We're happy to discuss your specific situation before the clinic.

We look forward to seeing if there's enough interest to bring this event back!

06/12/2026

Visible fog is easy. Effective remediation is much harder.

When evaluating a mold remediation or biodecontamination service, it's important to understand that visible fog is not the same thing as effective treatment.

The effectiveness of a biodecontamination process depends on far more than what you can see. Particle size, humidity control, chemistry delivery, distribution throughout the structure, operator training, validation testing, and treatment protocols all play a critical role.

When evaluating a company, ask questions:

✔ Is the technology patented?
✔ Has it been independently validated?
✔ How is droplet size controlled?
✔ Is there a documented treatment protocol with studies confirming efficacy?

The question isn't whether a machine can create fog.

The question is whether it can consistently create the controlled environment necessary for effective whole-structure treatment.

We've written a new article explaining what property owners, facility managers, and healthcare practitioners should know when evaluating fogging and biodecontamination technologies. You will find it in our Knowledge Centre:

https://www.allclearsolutions.ca/post/not-all-fogging-technologies-are-created-equal

06/05/2026

It's that time of year! Yes, the heat is on its way.

Most homeowners don't think about mold when they turn on their air conditioner.

Maybe they should.

Your AC system removes moisture from the air every day. If filters, coils, drain pans, or condensate lines aren't properly maintained, that same moisture can contribute to mold growth and poor indoor air quality.

Before summer gets into full swing, take a few minutes to learn how proper AC maintenance can help protect your home and your family's health.

Read more here: https://www.allclearsolutions.ca/post/the-importance-of-maintaining-and-cleaning-air-conditioning-units-and-how-it-helps-prevent-mold-grow

04/06/2026

DIY is awesome. But not when you have questions about mold.

If you’ve discovered a musty smell in your home or suspect mold growth, you may be tempted to try a DIY mold test kit, such as Mold Armor. These kits promise a simple, seemingly inexpensive solution—but they are extremely limited and should never replace a professional mold inspection. Here’s ...

03/09/2026

Can’t sleep? Waking up tired no matter how long you’re in bed? 😴

The problem might not be your mattress… it could be mold in your home.

Hidden mold can affect air quality and may even contribute to sleep issues.

Learn the warning signs 👇

If you’ve been lying awake at night worrying about mold in your home, you’re not alone. Many homeowners feel stressed when they discover mold, especially if they’ve been experiencing unexplained health symptoms.But here’s something many people don’t realize:In some cases, mold exposure its...