Landlord Property Certificates

18/06/2026

𝗔𝗻 𝗘𝗜𝗖𝗥 𝗶𝘀𝗻’𝘁 “𝗷𝘂𝘀𝘁 𝘃𝗮𝗹𝗶𝗱” 𝗳𝗼𝗿 𝟱 𝘆𝗲𝗮𝗿𝘀.

It is valid because electrical systems change.

✔️ Wires age.
✔️ Circuits overload.
✔️ Damage happens.
✔️ Poor maintenance creates risk.

𝘈𝘯𝘥 𝘵𝘩𝘢𝘵 𝘳𝘪𝘴𝘬 𝘤𝘢𝘯 𝘭𝘦𝘢𝘥 𝘵𝘰 𝘴𝘩𝘰𝘤𝘬, 𝘧𝘪𝘳𝘦, 𝘪𝘯𝘫𝘶𝘳𝘺, 𝘰𝘳 𝘱𝘳𝘰𝘱𝘦𝘳𝘵𝘺 𝘥𝘢𝘮𝘢𝘨𝘦.

For rented properties in England, landlords must ensure electrical installations are inspected and tested at least every 𝟱 𝘆𝗲𝗮𝗿𝘀 under the Electrical Safety Standards Regulations 2020.

BS 7671 guidance also points to:

𝗥𝗲𝗻𝘁𝗲𝗱 𝗵𝗼𝗺𝗲𝘀: 5 years
𝗢𝘄𝗻𝗲𝗿-𝗼𝗰𝗰𝘂𝗽𝗶𝗲𝗱 𝗵𝗼𝗺𝗲𝘀: 10 years
𝗛𝗶𝗴𝗵-𝗿𝗶𝘀𝗸 𝗽𝗹𝗮𝗰𝗲𝘀: 1–3 years

A valid EICR protects tenants.

It also helps landlords reduce liability, meet legal duties, avoid enforcement issues, and support insurance compliance.

𝗖𝗵𝗲𝗰𝗸 𝘆𝗼𝘂𝗿 𝗘𝗜𝗖𝗥 𝗱𝗮𝘁𝗲 𝗯𝗲𝗳𝗼𝗿𝗲 𝗶𝘁 𝗯𝗲𝗰𝗼𝗺𝗲𝘀 𝗮 𝗽𝗿𝗼𝗯𝗹𝗲𝗺.

Read more here:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/validity/

17/06/2026

𝗬𝗼𝘂𝗿 𝗘𝗜𝗖𝗥 𝗺𝗶𝗴𝗵𝘁 𝗯𝗲 𝘃𝗮𝗹𝗶𝗱… 𝗯𝘂𝘁 𝗶𝘀 𝗶𝘁 𝘀𝘁𝗶𝗹𝗹 𝗽𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗻𝗴 𝘆𝗼𝘂?

For UK rental properties, an EICR is usually valid for 𝟱 𝘆𝗲𝗮𝗿𝘀.

But here’s the part many landlords miss:

✅ 𝘐𝘧 𝘵𝘩𝘦 𝘳𝘦𝘱𝘰𝘳𝘵 𝘴𝘢𝘺𝘴 𝘦𝘢𝘳𝘭𝘪𝘦𝘳 𝘳𝘦𝘵𝘦𝘴𝘵𝘪𝘯𝘨 𝘪𝘴 𝘯𝘦𝘦𝘥𝘦𝘥, 𝘵𝘩𝘢𝘵 𝘥𝘢𝘵𝘦 𝘮𝘢𝘵𝘵𝘦𝘳𝘴.

✅ A valid EICR is not just paperwork.

✅ It proves the fixed electrical installation has been inspected.

✅ It helps protect tenants.

✅ It supports landlord compliance.

✅ It can prevent delays when renting, renewing, or managing a property.

𝗞𝗲𝘆 𝗿𝗲𝗺𝗶𝗻𝗱𝗲𝗿𝘀:

✅ Existing tenants should receive the report within 28 days.

✅ New tenants should receive it before moving in.

✅ Any C1, C2, or FI issues need proper action.

So don’t wait until expiry causes a problem.

Check your EICR date now.

Full guide here:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/validity/

12/06/2026

𝗛𝗼𝘄 𝗺𝘂𝗰𝗵 𝗱𝗼𝗲𝘀 𝗮𝗻 𝗘𝗜𝗖𝗥 𝗰𝗼𝘀𝘁 𝗶𝗻 𝗟𝗼𝗻𝗱𝗼𝗻?

Typical landlord EICR prices are often around £100 to £250+.

Studio or 1-bed flat: around £100 to £150.

2-bed flat: around £150 to £200.

3-bed house: around £200 to £250.

HMOs, large houses, old wiring, and commercial units can cost more.

The price depends on circuits, access, consumer unit condition, property size, and whether remedial work is needed.

The real cost risk is an unsatisfactory report with C1, C2, or FI codes.

Landlords can face enforcement and fines up to £30,000 if electrical safety duties are ignored.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/cost/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

The EICR (Electrical Installation Condition Report) cost is the charge for inspection, testing, and certification of fixed electrical installations in the UK

11/06/2026

𝗪𝗵𝗮𝘁 𝗮𝗿𝗲 𝘁𝗵𝗲 𝗘𝗜𝗖𝗥 𝗿𝗲𝗴𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝗹𝗮𝗻𝗱𝗹𝗼𝗿𝗱𝘀?

The direct answer: landlords in England need electrical inspections at least every 5 years.

The rule comes from the Electrical Safety Standards in the Private Rented Sector Regulations 2020.

Landlords must use a qualified person, keep the report, give the report to tenants, and complete required remedial work.

If a local authority asks for the report, landlords usually need to provide it within 7 days.

If the report is unsatisfactory, remedial work should usually be completed within 28 days, or sooner if the report says so.

Financial penalties can reach £30,000.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/regulations/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

EICR regulations are legal requirements set under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020. Electrical Safety

10/06/2026

𝗛𝗼𝘄 𝗼𝗳𝘁𝗲𝗻 𝘀𝗵𝗼𝘂𝗹𝗱 𝗹𝗮𝗻𝗱𝗹𝗼𝗿𝗱𝘀 𝗱𝗼 𝗣𝗔𝗧 𝘁𝗲𝘀𝘁𝗶𝗻𝗴?

There is no fixed 12-month legal rule for every private rental.

But annual PAT testing is a sensible record for furnished rentals, HMOs, serviced accommodation, and landlord-supplied appliances.

High-use appliances may need checks every 6 to 12 months.

PAT testing checks plugs, cables, fuses, insulation, earth continuity, appliance damage, and safe operation.

For London landlords, this matters when providing kettles, microwaves, fridges, washing machines, lamps, heaters, and extension leads.

Unsafe appliances can create electrical fire risk and tenant injury risk.

Read more:
https://landlordpropertycertificates.co.uk/portable-appliance-testing/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

Portable appliance testing involves visual inspection and electrical testing of appliances in a property to ensure they are safe to use. PAT stands for

10/06/2026

𝗛𝗼𝘄 𝗼𝗳𝘁𝗲𝗻 𝗱𝗼 𝗹𝗮𝗻𝗱𝗹𝗼𝗿𝗱𝘀 𝗻𝗲𝗲𝗱 𝗮 𝗚𝗮𝘀 𝗦𝗮𝗳𝗲𝘁𝘆 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗰𝗮𝘁𝗲?

The direct answer: every 12 months.

A Gas Safety Certificate, also called CP12, must be completed by a Gas Safe registered engineer.

It covers landlord-provided gas appliances, boilers, gas cookers, gas fires, flues, ventilation, gas pressure, safety devices, and signs of unsafe operation.

Landlords must give tenants a copy of the gas safety record.

If an appliance is unsafe, it must not be used until fixed.

Ignoring CP12 duties can create HSE action, carbon monoxide risk, gas leak risk, insurance problems, and tenancy compliance issues.

Read more:
https://landlordpropertycertificates.co.uk/gas-safety-certificate/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

A Gas Safety Certificate (CP12; CORGI Proforma) is a legal document issued by a Gas Safe registered engineer to confirm that all gas appliances and gas

09/06/2026

𝗪𝗵𝗮𝘁 𝗱𝗼 𝗘𝗜𝗖𝗥 𝗰𝗼𝗱𝗲𝘀 𝗺𝗲𝗮𝗻?

Here is the direct answer.

𝗖1 = danger present.
Immediate action is needed.

𝗖2 = potentially dangerous.
Remedial work is needed.

𝗙𝗜 = further investigation.
More checks are needed before safety can be confirmed.

𝗖3 = improvement recommended.
The report can still be satisfactory if only C3 codes appear.

For London landlords, C1, C2, or FI usually means the EICR is unsatisfactory.

That matters because rented properties need electrical checks at least every 5 years.

Unresolved defects can create tenant safety risk, enforcement risk, and fines up to £30,000.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/codes/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

EICR codes are standardized classification labels in an Electrical Installation Condition Report to convey the level of safety of electrical installations and

08/06/2026

𝗛𝗼𝘄 𝗼𝗳𝘁𝗲𝗻 𝗱𝗼 𝗹𝗮𝗻𝗱𝗹𝗼𝗿𝗱𝘀 𝗻𝗲𝗲𝗱 𝗮𝗻 𝗘𝗜𝗖𝗥?

The direct answer: at least every 5 years.

But there are 3 important exceptions.

1. If the report says the next test is due sooner, follow that date.

2. If major electrical work is completed, retesting may be needed.

3. If the property has fire, flood damage, old wiring, or repeated faults, do not wait 5 years.

For London HMOs, councils may also expect strong electrical safety evidence during licensing.

Expired EICR records can lead to enforcement action and fines up to £30,000.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/frequency/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

The EICR frequency is the interval at which an Electrical Installation Condition Report is conducted on a property to ensure its safety and compliance. In

06/06/2026

𝗛𝗼𝘄 𝗹𝗼𝗻𝗴 𝗱𝗼𝗲𝘀 𝗮𝗻 𝗘𝗜𝗖𝗥 𝘁𝗮𝗸𝗲 𝗶𝗻 𝗟𝗼𝗻𝗱𝗼𝗻?

A normal landlord EICR usually takes 1 to 4 hours.

Studio or 1-bed flat: 1 to 2 hours.

2-bed flat: 2 to 3 hours.

3-bed house: 3 to 4 hours.

HMO or larger property: 4+ hours.

Commercial units can take longer.

The exact time depends on the number of circuits, consumer unit condition, age of wiring, socket access, tenant access, and electrical faults found during testing.

A proper EICR is not a quick visual check.

It tests the fixed electrical installation against safety standards.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/duration/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

The EICR duration is the time required to conduct the electrical inspection of a property and issue the EICR. The EICR duration for residential properties is

06/06/2026

𝗗𝗼 𝗟𝗼𝗻𝗱𝗼𝗻 𝗹𝗮𝗻𝗱𝗹𝗼𝗿𝗱𝘀 𝗻𝗲𝗲𝗱 𝗮𝗻 𝗘𝗜𝗖𝗥?

Yes.

Private rented properties in England need an Electrical Installation Condition Report at least every 5 years, or sooner if the report says so.

An EICR checks the fixed electrical installation.

That includes the consumer unit, wiring, circuits, sockets, switches, earthing, bonding, RCD protection, and signs of overheating or damage.

The result is either satisfactory or unsatisfactory.

C1, C2, or FI usually means remedial work is required.

Ignoring landlord electrical safety duties can lead to local authority enforcement and fines up to £30,000.

Read more:
https://landlordpropertycertificates.co.uk/electrical-installation-condition-report/

-----

𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙞𝙨 𝙖 𝙩𝙤𝙥-𝙧𝙖𝙩𝙚𝙙 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙧 𝙞𝙣 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙙𝙚𝙡𝙞𝙫𝙚𝙧𝙞𝙣𝙜 𝙛𝙪𝙡𝙡𝙮 𝙘𝙤𝙢𝙥𝙡𝙞𝙖𝙣𝙩 𝙐𝙆 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙥𝙧𝙤𝙫𝙞𝙙𝙚𝙨 𝙂𝙖𝙨 𝙎𝙖𝙛𝙚𝙩𝙮 (𝘾𝙋12), 𝙀𝙄𝘾𝙍, 𝙀𝙋𝘾, 𝙁𝙞𝙧𝙚 𝙎𝙖𝙛𝙚𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨, 𝙁𝙞𝙧𝙚 𝙍𝙞𝙨𝙠 𝘼𝙨𝙨𝙚𝙨𝙨𝙢𝙚𝙣𝙩𝙨, 𝙖𝙣𝙙 𝙋𝘼𝙏 𝙩𝙚𝙨𝙩𝙞𝙣𝙜, 𝙥𝙡𝙪𝙨 𝙗𝙤𝙞𝙡𝙚𝙧, 𝙛𝙪𝙨𝙚𝙗𝙤𝙖𝙧𝙙, 𝙚𝙡𝙚𝙘𝙩𝙧𝙞𝙘𝙖𝙡, 𝙖𝙣𝙙 𝙥𝙡𝙪𝙢𝙗𝙞𝙣𝙜 𝙨𝙚𝙧𝙫𝙞𝙘𝙚𝙨. 𝙇𝙖𝙣𝙙𝙡𝙤𝙧𝙙 𝙋𝙧𝙤𝙥𝙚𝙧𝙩𝙮 𝘾𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙚𝙨 𝙤𝙥𝙚𝙧𝙖𝙩𝙚𝙨 𝙖𝙘𝙧𝙤𝙨𝙨 𝘾𝙚𝙣𝙩𝙧𝙖𝙡 𝙇𝙤𝙣𝙙𝙤𝙣, 𝙂𝙧𝙚𝙖𝙩𝙚𝙧 𝙇𝙤𝙣𝙙𝙤𝙣, 𝘿𝙖𝙧𝙩𝙛𝙤𝙧𝙙, 𝙒𝙖𝙩𝙛𝙤𝙧𝙙, 𝙖𝙣𝙙 𝙩𝙝𝙚 𝙚𝙣𝙩𝙞𝙧𝙚 𝙈25, 𝙚𝙣𝙨𝙪𝙧𝙞𝙣𝙜 𝙛𝙖𝙨𝙩 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧 𝙧𝙚𝙨𝙥𝙤𝙣𝙨𝙚 𝙖𝙣𝙙 𝙡𝙚𝙜𝙖𝙡𝙡𝙮 𝙫𝙖𝙡𝙞𝙙 𝙘𝙚𝙧𝙩𝙞𝙛𝙞𝙘𝙖𝙩𝙞𝙤𝙣 𝙛𝙤𝙧 𝙡𝙖𝙣𝙙𝙡𝙤𝙧𝙙𝙨, 𝙃𝙈𝙊𝙨, 𝙛𝙡𝙖𝙩𝙨, 𝙖𝙣𝙙 𝙚𝙨𝙩𝙖𝙩𝙚-𝙢𝙖𝙣𝙖𝙜𝙚𝙙 𝙥𝙧𝙤𝙥𝙚𝙧𝙩𝙞𝙚𝙨.

-----

An Electrical Installation Condition Report (EICR) is a formal document issued by a qualified electrician after assessing the safety condition of a property’s