ISR Laser

Directions Website Contact the business

ISR Laser Mobile material recovery service using laser technology on graffiti, oxidisation rust and stains in concrete and steel.

Travel
March.

Warwick, Coventry, Basingstoke, Edinburgh Berwick.

15/11/2026

CLEAN THE STONE – Don't remove the mortar

Does your stone building need cleaning, but you're worried about damaging the original mortar? Your in safe hands with ISR.

Over recent months, ISR has been working on natural stone buildings across the North East and Yorkshire, demonstrating how laser cleaning can restore tired-looking stonework and mortar without subjecting it to the punishment of conventional blasting.

There is a very important difference.

Many buildings dating back to the 1800s were constructed using traditional methods, often with relatively soft mortar or lightweight dry-mix material between the stones.

These joints are part of the building's original fabric and can be extremely vulnerable to abrasive blasting and aggressive cleaning methods. Replacing it changes the colour of the building and needs to bond which is not how the building was meant to be.
This is where ISR's laser cleaning service offers a real advantage.

Our laser targets the unwanted surface contamination, allowing the original stone and, importantly, the mortar between the stones to remain intact.

Why does this matter?

Because cleaning an historic building should never come at the expense of damaging the very structure you are trying to preserve.

There are further benefits:

No abrasive blasting media to collect and dispose of.

No widespread debris blown into surrounding areas.

Minimal disruption to the surrounding property.

No need to remove and replace sound original mortar simply because of the cleaning process.

PRESERVE THE BUILDING WHILE RESTORING ITS APPEARANCE.

If you own or manage an older property, have a stone wall, historic building or delicate masonry that needs attention, ISR would welcome the opportunity to discuss how we can help.

We are currently looking to take on additional projects before Christmas across the North East and Yorkshire.

Don't assume blasting is your only option.

Give ISR a call and let us show you what laser cleaning can achieve.

ISR Laser – Protect. Maintain. Enjoy.

Making light work of difficult cleaning challenges.

12/11/2026

20 YEARS IN STORAGE – READY FOR A NEW LEASE OF LIFE!

This Renault Clio engine had stood for over 20 years before being removed for rebuilding.

Before it can return to service, the accumulated contamination needs to be removed and the components properly prepared for inspection and restoration.

This is where ISR's laser cleaning service offers something different.

Unlike traditional abrasive cleaning methods such as sand or shot blasting, laser cleaning uses no blasting media. There is no grit being fired at the component, no spent abrasive left behind and no residual blasting material to find its way into awkward spaces.

So what makes laser cleaning different?

No abrasive blasting media.

No residual grit or spent blasting material.

No abrasive blasting dust created by the process.

Minimum energy

Controlled cleaning, allowing attention to be focused on specific areas.

Suitable for detailed components where conventional cleaning methods can be difficult.

The laser removes unwanted surface contamination, while our extraction and filtration equipment captures the material generated during cleaning. No heat is transmitted and no parent material taken away.

For engine rebuilders, classic-car restorers and enthusiasts, this offers a cleaner, more controlled way to prepare components for the next stage of their restoration.

At ISR, we don't simply clean parts. We help recover them, making the next stage of the job easier.

Have components that need recovering before rebuilding? Give us a call. We can bring the cleaning process to you.

ISR Laser – Protect. Maintain. Enjoy.

06/11/2026

Natural Stone Restoration and Cleaning

ISR was recently asked to assess a city centre building suffering from staining and contamination on its sandstone exterior. The marks had built up over time from cigarette stubs, bicycle tyre scuffs, exhaust emissions, and spilled drinks.

As many property owners know, porous natural stone can be difficult to clean. Traditional chemical cleaning methods may remove surface stains but can also have a detrimental effect on the stone over time, potentially accelerating deterioration and bring a colour change.

Following extensive testing in an inconspicuous area to establish the correct laser settings, we began cleaning a sample section, with the results shown below.

If you have natural stone features that have become stained or distressed, we would be pleased to help. This includes:

• Hotel entrances and reception areas
• Stone fireplaces and surrounds
• Internal and external stone walls
• Dark stone flooring and upstands
• Listed and heritage stonework

In many cases, all we need to get started is a photograph of the affected area. We can then assess the condition and recommend the most suitable restoration approach.

One of the benefits we consistently see is that cleaned stone reflects more natural and artificial light, helping to brighten interior spaces and create a more welcoming environment.

We are currently seeking projects throughout the North East and across the UK in hotels, larger residential properties, and commercial buildings through to Christmas.

If you have a natural stone feature that could benefit from specialist laser cleaning and restoration, please get in touch for a no-obligation discussion.

02/11/2026

Another opportunity to make a real difference through laser cleaning.

ISR was recently approached to assess damaged blockwork, with the aim of restoring what was already there rather than facing the cost and disruption of replacing it.

For ISR, this immediately presented an exciting challenge and, more importantly, a genuine sustainability project.

By exploring what could be achieved through laser cleaning, we were looking at an opportunity to preserve existing materials, avoid unnecessary waste and potentially save considerable disruption in a busy town centre.

This is exactly the sort of challenge that drives ISR forward: finding solutions to problems that traditional methods may struggle to address without major disruption.

Protect. Maintain. Enjoy.

ISR – Making Light Work.

28/10/2026

ISR was recently approached by a motorcycle restorer with a specific challenge: removing chrome from a motorcycle fuel tank to prepare for painting.

ISR began with a trial area so the painter could assess the surface and confirm it was suitable for the next stage of restoration.

Once the painter approved the result, we completed the cleaning, leaving the tank ready for its next stage.

At ISR, we work alongside restorers to find practical solutions to challenging cleaning jobs. Our mobile laser cleaning service means we can come to you, helping to recover parts without the mess and residual media associated with traditional blasting methods.

🔧 Restorers, garages and motorcycle enthusiasts — if you have a difficult cleaning job, why not talk to us?

Contact ISR Laser to discuss your project.

25/10/2026

Another restoration challenge for ISR Laser!

Recently, we had the opportunity to work alongside a motorcycle restorer, recovering delicate brass filters using laser cleaning.

As you can see in the video, the laser works without physically touching the filters, helping remove unwanted contamination while preserving the original components.

It’s a great example of how laser cleaning can be used on delicate parts where traditional cleaning methods may be too aggressive.

Watch this space!
Next week, we hope to share another clip showing chrome removal to prepare a surface for painting.

Have a restoration project with parts that need careful attention? Get in touch with ISR Laser to see what we can do.

ISR Laser – Protect, Maintain, Enjoy.

02/10/2026

A recent project that perfectly demonstrates the advantages of laser cleaning.

ISR was recently asked to restore what was believed to be the only front panel the owner could source for a Chevrolet restoration project, making precision absolutely critical.

Using our laser cleaning technology, we were able to achieve outstanding results with:

1. No knuckle-rash
2. The panel remaining cool throughout the process no material
changes
3. No removal of parent material
4. A consistent, uniform finish, even in difficult-to-reach areas
5. No waste created

When irreplaceable components are involved, laser cleaning offers a level of control, precision and surface preservation that conventional methods simply cannot match.

If you have a restoration, engineering, or industrial cleaning challenge, get in touch to see how ISR can help

30/09/2026

Bring back the kerb appeal and remove the stains from your block paving and patio with ISR.

Why laser clean an engine instead of blasting it?The main advantage of laser cleaning is that it leaves no abrasive medi...
29/09/2026

Why laser clean an engine instead of blasting it?

The main advantage of laser cleaning is that it leaves no abrasive media or solid contaminants behind inside the engine. With blasting methods, there is always a risk that particles of shot, grit or other blasting media can remain trapped within the engine, even after thorough cleaning.

If just one piece of abrasive material is left behind and enters the oil system, it can circulate through the engine and cause premature wear or damage to critical components. This is a real risk if the seller or long term user is keeping the vehicle.

What finish does laser cleaning leave?
The finish depends on the type of laser used:

âś… Continuous-wave lasers typically leave a matt finish. They are designed to remove heavy contamination, coatings and corrosion efficiently.

âś… Pulsed lasers generally leave a brighter, more polished finish on engine components. Because they operate with lower heat input, they offer greater control and can produce a cleaner cosmetic finish while still removing contaminants effectively.

Laser cleaning provides a safe, precise and environmentally friendly solution for engine restoration, preserving the underlying material without introducing abrasive residue,

After cleaning a number of engines recently please advise as its something we are looking at long term. Should you have a need to laser clean an engine please come to us as a path forward.

21/09/2026

Attached is a clip from a recent project, cleaning components destined for a rebuild.

Many classic car and machinery parts spend years in storage and often show signs of corrosion, contamination, and surface deterioration. In many cases, traditional methods such as blasting, grinding, or aggressive mechanical cleaning simply aren't suitable due to the shape, complexity, or delicate material of the component.

This is where laser cleaning comes into its own. The video demonstrates how laser technology can safely and effectively remove contamination while preserving the underlying surface, making it an ideal solution for classic vehicle restoration, specialist engineering, and in-situ cleaning applications.

If you, your club, or your restoration group have parts in storage that need attention, send us a photograph and we'll be happy to review them and advise on the most suitable cleaning approach.

📍 We are currently undertaking projects across the North East, North West, Scotland, and North Yorkshire.

ISR – Instant Surface Recovery
Precision laser cleaning for restoration, engineering, and industrial applications.

Address

15 Front Street, Durham DH6 1PA , Reg Office Address
Newton Aycliffe
DL56ZE

Alerts

Be the first to know and let us send you an email when ISR Laser posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ISR Laser:

Shortcuts

Share

Category

Nearby estate agents & services