G Square Properties

26/09/2024

19/09/2024

Looking for a best investment in coimbatore

19/09/2024

LOOKING FOR A NEW HOME ON SAKTHI MAIN HIGH WAY

HERE IS THE BEST PLACE YOU CAN FIND.




-SEZ IT PARK

03/05/2022

Happy Eid Mubarak!

01/05/2022

முயன்றால் முடியாதது இல்லை
முயற்சிப்போம் முடிவுக்காக அல்ல.
நம் முன்னேற்றத்திற்காக...
தொழிலாளர் தின வாழ்த்துக்கள்.

30/03/2022

Technical Blog 2:
Minimising the defects in plastering work.
1.The brick and plastering work should be carried out by skilled masons in the best workmanship manner.
2.Bond of brick work should be properly maintained.
3.Efflorescence is removed by rubbing brushes on the damaged surface. Water should not be used to wash the surface so as to remove efflorescence. In that case, soluble salts will be partly carried inside the surface and efflorescence will appear again.
4.The surface to be plastered should be well watered so that it may not absorb water from the plaster.
5.Excessive trowelling should be avoided.
6.Damp-proof courses should be provided at convenient places in the building.
7.Fresh plastered surfaces should be protected from the surplus quantity of water such as rain and excessive heat such as sun.

03/03/2022

Technical Blogs 1:
BRICKWORK CHECK LIST
1.The thickness of joint in brick masonry should not exceed 1 cm.
2.The face joints should be raked to a depth of 15 mm by raking tool when the mortar is still green so as to provide proper key for plaster or pointing.
3.Brickwork should be taken up in layers not exceeding one meter height at a time.
4.Check that the brick work is in plumb.
5.Check that the brick courses are in level.
6.Check the quality of bricks with specific reference to
Strength
Efflorescence
Dimensional accuracy
Water absorption