Hakmaz Homes & Properties Limited

20/05/2026

17/01/2026

STUNNING 5-BEDROOM DUPLEX ❤️💙🩷

Spacious, modern, and perfect for growing families or those who love to entertain! This impressive duplex features multiple living areas, ample storage, and great natural light throughout. With 5 well-proportioned bedrooms, there's space for everyone to thrive.

🌏Hakmaz Homes & Properties Ltd.
Osogbo, Osun State, Nigeria.
☎️08035344900 (WhatsApp)

28/12/2025

💙❤️💙

26/12/2025

YOUR GUIDE TO IDENTIFYING WEAK BLOCKS ON SITE

26/12/2025

💥 YOUR GUIDE TO IDENTIFYING WEAK BLOCKS ON SITE ✅✅✅

One major reason many buildings crack or fail early is the use of weak blocks during construction.
A wall is only as strong as the blocks that form it, and knowing how to identify a weak block can save you from costly repairs or future collapse.

Many block makers focus on producing more blocks from a bag of cement, instead of ensuring quality.
But you, as a client or builder, should always know what to look out for.

✅ Signs of a Weak Block

1. It breaks easily when dropped
A good block should not shatter when dropped from about 3–4 feet high.
If it breaks into pieces, the cement ratio is poor or curing was not done properly.

2. It sounds dull when hit together
When you hit two strong blocks together, you’ll hear a sharp, ringing sound.
Weak blocks sound dull and dusty, that’s a red flag.

3. The surface looks sandy or powdery
If the block surface rubs off easily or leaves sand on your hand, it means there wasn’t enough cement to bind the particles.

4. It feels too light
Quality blocks are a bit heavy because they’re dense and well compacted.
If it feels unusually light, it’s likely full of air pockets, meaning less strength.

5. Cracks or honeycomb holes on the sides
Visible cracks or small holes show poor mixing or vibration during molding.
Such blocks won’t carry load effectively.

👉Why You Should Care

Weak blocks may look fine during construction, but with time they cause wall cracks, bulging, and sometimes total collapse.
It’s always better to spend a bit more on quality blocks than to spend a fortune repairing damages later.

If possible, ask for a compressive strength test from a reliable block industry, it’s the best way to confirm quality.

Quality materials bring peace of mind.
Don’t let anyone convince you that all blocks are the same, strength starts from the mix.

🌏Hakmaz Homes & Properties Ltd.
Osogbo, Osun State, Nigeria.
☎️08035344900

25/12/2025

❤️🩷💙

25/12/2025

HOW TO CALCULATE THE NUMBER OF BLOCKS FOR A WALL IN NIGERIA (STEP-BY-STEP)

💥 1 — measure the wall
Multiply wall height × wall length to get the gross wall area.
Example: 3.00 m × 5.00 m = 15.00 m²

💥Step 2 — subtract openings (doors/windows)
Measure each opening and subtract its area from the gross wall area.
Example window (assumed): 1.20 m × 1.20 m = 1.44 m²
Net wall area = 15.00 − 1.44 = 13.56 m²

💥Step 3 — find the face area of one block
Use the face dimensions of the block (length × height) in metres.
Assumption used in this example: 6-inch concrete block face = 0.45 m × 0.225 m (450 mm × 225 mm)
One block face area = 0.45 × 0.225 = 0.10125 m²

💥Step 4 — divide net wall area by block face area
Number of blocks (theoretical) = Net wall area ÷ Block area
13.56 ÷ 0.10125 = 133.9259 → 134 blocks (round up)

💥Step 5 — add allowance for wastage/cutting
Always add 5–10% for cuts, breakage and wastage. For safety I use 10%:
134 × 1.10 = 147.4 → 148 blocks

Final result for this example (3 m × 5 m wall with one 1.2 × 1.2 m window)

Order: 148 blocks (using 450×225 mm blocks; includes 10% waste)

✅Notes & tips

If your block size differs, replace the block face dimensions in Step 3 and repeat the math.

Mortar joint thickness is normally small and partly compensated by block face area, the method above is standard practice on sites.

Hollow blocks vs solid blocks: hollow block counts are similar by face area, but strength/weight differs, choose per structural requirements.

If you have many openings, subtract all opening areas before dividing.

For long orders, confirm with your block supplier, sometimes they quote in pack sizes or by pallet.

🌏 Hakmaz Homes & Properties Ltd
Osogbo, Osun State, Nigeria.
☎️ 08035344900 (WhatsApp only)

22/12/2025

💥Essential Kitchen Features for Today’s Homes.

When designing your dream home, the kitchen deserves special attention, it’s not just where meals are made, it’s where memories are shared.
A well planned kitchen makes cooking easier, cleaner, and more enjoyable.
Here are some top kitchen features you should consider 👇

1. Adequate Storage Spaces
Include enough cabinets and drawers for utensils, plates, and food items.
Upper and lower cabinets help keep the kitchen neat and organized.

2. Proper Ventilation
Install good windows or a cooker hood to remove heat, smoke, and odour quickly.
Ventilation keeps your kitchen cool and fresh during cooking.

3. Strong and Durable Countertops
Use granite, quartz, or quality tiles for your work surfaces.
They’re easy to clean, water-resistant, and long-lasting.

4. Good Lighting
A mix of natural and artificial lighting makes your kitchen bright and comfortable.
Task lighting above the sink and worktop improves visibility.

5. Power and Plumbing Points
Provide enough sockets for electrical appliances and ensure proper plumbing connections for sinks and dishwashers.

6. Proper Floor Finishing
Choose anti slip tiles for safety and easy cleaning, especially in wet areas.

7. Waste Disposal Space
Always plan a hidden or well positioned waste bin area to keep your kitchen tidy.

8. Functional Layout
Design your kitchen with the “work triangle” in mind, the sink, fridge, and cooker should form a triangle for easy movement and efficiency.

Whether it’s a small apartment kitchen or a luxury design, these features make a huge difference in functionality and comfort.

🌏Hakmaz Homes & Properties Ltd
Osogbo, Osun State, Nigeria.
☎️08035344900 (WhatsApp only)