How to start an anti-freeze production from scratch

How to start an anti-freeze production from scratch Antifreeze and windscreen washer fluids are made on the basis of alcohol, glycol and glycerin

It’s January, it’s cold throughout much of the U.S. (the high temperature in most of the country is below 50 degrees as ...
11/11/2021

It’s January, it’s cold throughout much of the U.S. (the high temperature in most of the country is below 50 degrees as I write this) and antifreeze is hard at work keeping motorists warm and on the road.

Most drivers don’t know much about antifreeze other than it’s thick green stuff you pour in your radiator to keep the car engine from over-heating. It also helps heat the passenger compartment. If the amount of anti-freeze is too low, steam often billows from under the hood and the car interior doesn’t get very warm. The typical remedy for this situation is to buy more antifreeze, pour it in the radiator and hope for the best.

The invention discloses a preparation method of anti-corrosion automobile antifreeze fluid, belonging to the technical f...
11/11/2021

The invention discloses a preparation method of anti-corrosion automobile antifreeze fluid, belonging to the technical field of the automobile antifreeze fluid. According to the preparation method, water is added to dilute eggs, river-bottom sludge is added for mixed fermentation, a concentrated solution rich in proteins and lecithin is obtained by sequentially carrying out sterilization and centrifugal concentration, and a high-melting-point chemical protecting film is formed on the metal surface at a high temperature by virtue of rich elements such as nitrogen, sulfur and phosphorus in the concentrated solution, so that the corrosion caused by the antifreeze fluid to metal is avoided; a waxy concentrated solution is extracted from rice straws and is blended with glycerin to replace traditional glycol so as to lower the freezing point of cooling liquid, so that acidic substances generated due to the oxidization is avoided, and the corrosion caused by the antifreeze fluid to metal components is foundationally eliminated. The preparation method has an extremely high application prospect.

Piping system.Certainly each type of equipment is important, but particular attention should be paid to the USB-type pla...
07/11/2021

Piping system.
Certainly each type of equipment is important, but particular attention should be paid to the USB-type plant manufactured by GlobeCore. It ensures high-quality mixing of two to five initial components. The advantages of this equipment include: precise control of dosage of each component, significant reduction of mixing cycle duration and no need to use mixing tanks for homogenization of the final product. During the process of mixing in an in-line mixer, the flow rate of each component is continuously adjusted in order to obtain the finished product with stable quality according to the predetermined recipe. The resulting non-freezing fluid does not break into individual components and has a long shelf life.

Theoretical payback period is calculated according to the specific conditions of your future production. It could be three months, six months or a year. This time interval can be reduced due to versatility of this equipment. The same line allows the production of three types of liquids: antifreeze, windscreen washer liquid and shampoo. The wider the range, the better the sales of the finished products.

WHAT IS NON-FREEZING LIQUID MADE OF?Antifreeze and windscreen washer fluids are made on the basis of alcohol, glycol and...
07/11/2021

WHAT IS NON-FREEZING LIQUID MADE OF?
Antifreeze and windscreen washer fluids are made on the basis of alcohol, glycol and glycerin.

Shady manufacturers of antifreeze often use methyl alcohol. It is relatively cheap and allows a good profit margin. But the whole problem is that this substance is rather toxic and can affect a human body not only after ingestion, but also after inhalation of high concentrations of its vapors.

Isopropyl alcohol is not as volatile and it forms a film on the glass which stays longer. However, it has specific pungent odor that can even break through the odor of fragrances added to antifreeze.

Address

Kyiv
023434

Telephone

+380675659886

Website

Alerts

Be the first to know and let us send you an email when How to start an anti-freeze production from scratch posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to How to start an anti-freeze production from scratch:

Shortcuts

Share

Category