10/08/2026
I bet if you haven’t thought about hurricane shutters on your home, you probably are now. There are several products you could use for that. And they have some different criteria to meet to be affective. They not only protect your home but in some cases can lower your insurance premiums. You’d have to call yours to get that precise information.
So….
Here’s a short break down.
🌀 HURRICANE SHUTTERS: WHAT’S THE DIFFERENCE, WHAT DO THEY COST, AND WHICH ONES QUALIFY FOR INSURANCE DISCOUNTS? 🏠
Living in Northwest Florida, hurricane protection is something every homeowner should consider. But did you know that you don’t necessarily have to purchase the most expensive shutters to qualify for valuable wind mitigation insurance credits?
Here’s a breakdown of the different types of hurricane shutters, listed approximately from least expensive to most expensive.
💰 1. PLYWOOD SHUTTERS
Estimated cost: $2–$6 per sq. ft. for materials.
🔹 Cut plywood to cover windows and doors, then secure it with appropriate fasteners.
🔹 Must be removed and stored after storms.
🔹 Standard plywood coverings generally do NOT qualify for hurricane impact-protection insurance credits.
Insurance rating: Generally not rated.
💰 2. STEEL HURRICANE PANELS
Estimated cost: $7–$15 per sq. ft. installed.
🔹 Corrugated galvanized steel panels.
🔹 Installed using permanently mounted tracks or anchors.
🔹 Panels are attached before a storm and removed afterward.
🔹 Heavy but very affordable.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
💰 3. HURRICANE FABRIC SHIELDS
Estimated cost: $10–$20 per sq. ft. installed.
🔹 Made from high-strength engineered synthetic fabric.
🔹 Lightweight, flexible, and easy to store.
🔹 Secured using approved anchors, tracks, or mounting systems.
🔹 Some systems can cover large patios and openings.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
⭐ IMPORTANT: Don’t underestimate hurricane fabric! An approved fabric protection system can provide the same impact-protection classification as approved metal hurricane shutters.
💰 4. ALUMINUM HURRICANE PANELS
Estimated cost: $10–$20 per sq. ft. installed.
🔹 Similar to steel panels but considerably lighter.
🔹 Corrosion resistant.
🔹 Installed using permanent tracks or anchors.
🔹 Removed and stored when not needed.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
💰 5. CLEAR POLYCARBONATE PANELS
Estimated cost: $10–$30 per sq. ft. installed.
🔹 Transparent impact-resistant panels.
🔹 Allow natural light into the home during storms.
🔹 Mounted using approved fastening systems.
🔹 Lightweight and corrosion resistant.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
💰 6. ACCORDION SHUTTERS
Estimated cost: $15–$30 per sq. ft. installed.
🔹 Permanently mounted aluminum shutters.
🔹 Fold open and closed along tracks.
🔹 No separate panel storage required.
🔹 Convenient for sliding glass doors and large openings.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
💰 7. BAHAMA & COLONIAL SHUTTERS
Estimated cost: $20–$50 per sq. ft. installed.
🔹 Decorative shutters that can also provide hurricane protection.
🔹 Bahama shutters hinge from above.
🔹 Colonial shutters swing closed from the sides.
🔹 Permanently installed and relatively easy to deploy.
Insurance rating: ONLY specifically approved impact-resistant models qualify. Decorative shutters alone do not!
💰 8. ROLL-DOWN HURRICANE SHUTTERS
Estimated cost:
Manual: $25–$55 per sq. ft.
Motorized: $35–$70+ per sq. ft.
🔹 Permanently mounted above windows and doors.
🔹 Operated manually or electronically.
🔹 Convenient for large openings.
🔹 No separate storage required.
Insurance rating: Approved large missile impact systems are available and may qualify for insurance credits.
━━━━━━━━━━━━━━━━━━
🌀 WHAT DOES LARGE MISSILE IMPACT RATED ACTUALLY MEAN?
This is one of the most important things homeowners should understand when shopping for hurricane protection.
There are TWO common types of impact testing:
🟡 SMALL MISSILE IMPACT
This testing uses small steel balls traveling approximately 60 mph to simulate smaller windborne debris.
A product rated ONLY for small missile impact does not automatically meet residential large missile impact requirements.
🟢 LARGE MISSILE IMPACT — LEVEL D
This test uses a 9-pound piece of 2×4 lumber traveling approximately 34 mph!
That’s right! A 9-pound piece of lumber is launched directly at the protective system.
The product must also withstand additional cyclic wind-pressure testing.
Large missile impact resistance is the classification commonly required for residential hurricane opening protection in Florida.
⚠️ IMPORTANT: Impact resistance and wind-pressure resistance are two different things. A shutter must meet BOTH the applicable impact requirements and the design-pressure requirements for its installation.
━━━━━━━━━━━━━━━━━━
🏡 WHAT DOES YOUR INSURANCE COMPANY REQUIRE?
Florida’s updated wind mitigation inspection form became effective April 1, 2026.
When purchasing hurricane shutters, remember these important points:
✅ PRODUCT APPROVAL: Look for an applicable Florida Product Approval number or Miami-Dade Notice of Acceptance.
✅ IMPACT RATING: Verify that the product meets the impact-protection requirements for your home and insurance classification.
✅ PROPER INSTALLATION: Shutters must be installed according to their approved installation specifications.
✅ COMPLETE PROTECTION: To qualify for certain opening-protection credits, ALL required openings must be properly protected. This can include windows, exterior doors, skylights, and garage doors.
✅ DOCUMENTATION: Keep your product approval information, installation records, and permits when applicable.
⚠️ Simply purchasing shutters advertised as “hurricane rated” does NOT guarantee an insurance discount.
━━━━━━━━━━━━━━━━━━
💵 HERE’S SOMETHING THAT COULD SAVE YOU THOUSANDS!
An approved hurricane shutter system costing $15 per square foot may qualify for the SAME opening-protection insurance classification as an approved system costing $70 per square foot!
Insurance companies don’t award higher opening-protection credits simply because you purchased more expensive shutters.
What matters is the approved protection, proper installation, and whether the home’s required openings meet the applicable insurance criteria.
Before spending thousands on expensive hurricane shutters, compare your options!
━━━━━━━━━━━━━━━━━━
🏠 LARK HOME CONSULTING
With 25 years of construction experience and 14 years of building inspection experience, I believe informed homeowners make better decisions.
Whether you’re purchasing a home, considering hurricane protection upgrades, or looking to maximize your available wind mitigation insurance credits, understanding your options is important.
📍 Proudly serving Northwest Florida.
Lark Home Consulting
Home Inspections | Wind Mitigation | 4-Point Inspections
Prices are general 2026 estimates and will vary depending on the product, opening size, installation requirements, and contractor. Insurance eligibility and discounts are determined by the applicable inspection criteria and insurance carrier.