07/13/2019
Staining & Restoration
Due to the nature of wood, paint simply can’t adhere to horizontal surfaces over the long run. It is common for the sun exposed side of a board to be 50 degrees hotter than the bottom side.This causes the warm side of the wood to contract while the bottom cool side stays swelled. This constant swelling and shrinking, churning and twisting make it impossible for paint to adhere to the horizontal surface of the wood; the result is peeling paint.
Best is to remove the current coating from your wood so we can stain it with a beautiful and maintainable oil based stain. Including, but not limited to, Power Washing, Ozzborne, Sanding,Chemical Stripping, Possible Wood Brightening (to restore wood tone and look before staining). To do the best job is to do a full restoration.To do that, we need to remove the coating mechanically. Due to the labor and equipment involved, removing a coating mechanically is triple the price of removing it chemically. Here are your available options.
1. Paint over the current coating. Lowest cost, short term solution. The new paint will begin to peel in months (we dont recommend this)
2. Replace the decking, spindles, railings, etc. Highest cost option. The framework and foundation of your deck will be used to rebuild the decking, railings, steps, etc. We work with Decking companys in the area and offer multiple options.
3. Full restoration. Sanding the primary horizontal surfaces, Chemiccly & or ozzborne. Using multiple methods in order to remove all previous treatements to bare wood. We can’t sand spindles or anything vertical easily. We sand the walking surfaces of the floor, steps and top of handrails. If there are benches, we sand the seating surfaces. We then Stain the surface, the result is a beautiful deck!
Choosing the best stain is the big decision ...