SERVCON

Call Directions Website Contact the business

SERVCON Facility Maintenance & Management company servicing locations throughout the United States.

A freeze-prone eyewash station or safety shower can’t protect anyone if it can’t deliver flushing fluid when needed.Fall...
11/04/2026

A freeze-prone eyewash station or safety shower can’t protect anyone if it can’t deliver flushing fluid when needed.

Fall maintenance often focuses on primary heating and water systems, while equipment at loading docks, parking structures, cold-storage corridors, and exterior sheds may need additional freeze protection.

Before freezing weather arrives, add these checks to your safety equipment inspection:
- Check heat trace: Where installed, verify power, controls, and alarms according to the manufacturer’s instructions.
- Inspect insulation and jacketing: Look for gaps, tears, water damage, or loose sections that could expose piping to cold.
- Test freeze-protection devices: Check applicable bleed valves, drain mechanisms, or other installed systems according to the manufacturer’s procedures.
- Verify flushing-fluid delivery: Confirm temperature, flow, and flush duration meet the requirements for that unit type.
- Activate and inspect each station: Follow your site’s testing schedule and manufacturer guidance. Check for unobstructed flow, proper drainage, and any connected alarms.
Findings from an inspection are only useful if they lead to repairs. Document any issues and address them before cold weather puts the equipment to the test.

How do you include loading dock and exterior eyewash stations in your winter PM checklist?

In a high-bay warehouse, the warmest air may be sitting where it does the least good—near the ceiling.When heat stratifi...
11/03/2026

In a high-bay warehouse, the warmest air may be sitting where it does the least good—near the ceiling.

When heat stratifies in warehouses, manufacturing plants, and distribution centers, floor-level teams can stay uncomfortable while rooftop units keep working to heat the space. The temperature difference can be significant, depending on the building and its systems.

Before winter arrives, add a destratification check to your fall preventive maintenance plan:
- Check fan operation and settings: Confirm HVLS and destratification fans run properly. Set them to move warm air downward without creating uncomfortable drafts.
- Review thermostat placement and calibration: Make sure floor-level sensors are reading accurately and calling for heat appropriately.
- Clean and inspect fan blades: Remove dust buildup and check for imbalance, vibration, or signs of motor strain.
- Coordinate fan schedules with your BAS: Where the system allows, align fan operation with heating cycles to help distribute warm air through the occupied space.
Destratification can improve comfort and support more efficient heating, though results depend on the facility, equipment, and control strategy.

Are your high-bay fans ready for winter? What’s part of your seasonal startup checklist?

Commercial buildings have their own Halloween jump scares. 🎃👻🙈 A tiny ceiling stain that turns out to be a roof or pipe ...
10/30/2026

Commercial buildings have their own Halloween jump scares. 🎃👻

🙈 A tiny ceiling stain that turns out to be a roof or pipe leak.
👻 An HVAC unit groaning because its filter or belt got overlooked.
🫣 A mystery draft sneaking in around a door or window.

Catch the clues early, before a small scare turns into a bigger repair.

Contractors and facility teams: what’s the most unexpected maintenance issue you’ve uncovered on the job? Share your field story below! 👇

Generator and electrical crews: a unit starting during a routine exercise doesn’t tell the whole story. It still needs t...
10/28/2026

Generator and electrical crews: a unit starting during a routine exercise doesn’t tell the whole story. It still needs to carry the loads the site depends on and transfer power correctly.

On a pre-winter service visit, what’s first on your checklist: load acceptance, ATS transfer, fuel system, batteries—or something else?

Drop the check you never skip. 👇

Snow crews: before the first push, where’s the snow going?Marking staging zones ahead of time helps keep piles out of ac...
10/27/2026

Snow crews: before the first push, where’s the snow going?

Marking staging zones ahead of time helps keep piles out of accessible parking, drive exits, walkways, and critical access areas. Walk the site with the property team, mark the plan, and make sure every driver knows the layout.

When you’re working a new property, how do you choose the pile locations: a site plan, a walkthrough, or both? Share your field tip. 👇

Contractors: when a building struggles to hold heat, where do you look first?Roof insulation? Wall joints and penetratio...
10/21/2026

Contractors: when a building struggles to hold heat, where do you look first?

Roof insulation? Wall joints and penetrations? Air leaks around doors and openings?

A pre-winter envelope review can help surface issues that affect comfort and heating demand before colder weather brings more complaints.

What signs tell you the envelope needs attention? Which details get overlooked most often? Share what you’re seeing in the field. 👇

Carpet and janitorial contractors: when do you recommend scheduling pre-winter carpet extraction?A deep clean before slu...
10/20/2026

Carpet and janitorial contractors: when do you recommend scheduling pre-winter carpet extraction?

A deep clean before slush and road salt arrive can help remove embedded summer soil and give facilities a cleaner start to the season.

Do you recommend extracting before the first snowfall, or after the first storm? Share what works in the field. 👇

Dark comes earlier after the clocks change. A quick evening check can catch exterior lights that fail when your site nee...
10/16/2026

Dark comes earlier after the clocks change. A quick evening check can catch exterior lights that fail when your site needs them most.

Before Nov. 1, check:
💡 Time clocks and BAS schedules
🌇 Photocells for dirt or blocked views
🚶 Parking lots, entrances, walkways, and loading docks after dark

Keep emergency-light checks on their regular inspection schedule, too.

What’s the most common lighting issue on your sites:
A) timers
B) photocells
C) dead fixtures?

Comment below.

Rodents don’t need much of an invitation. A mouse can fit through an opening about 1/4 inch wide.Before the cold sets in...
10/14/2026

Rodents don’t need much of an invitation. A mouse can fit through an opening about 1/4 inch wide.

Before the cold sets in, take a quick lap around the building and check:

🔍 Foundation and utility penetrations
🚪 Door sweeps and dock seals
🌿 Dense vegetation and roofline access
🗑️ Dumpster lids, pads, and nearby storage

Use rodent-resistant materials suited to the opening, and keep the perimeter clear.

Contractors and facility teams: where do you find the most entry gaps?

A) Dock doors
B) Utility penetrations
C) Roof edges and eaves
D) Refuse or storage areas

Drop a letter—and tell us what fix holds up best on your sites.

Heat trace is easy to forget—until the first freeze puts it back on the call list.Before startup, check the basics:🔧 Cab...
10/13/2026

Heat trace is easy to forget—until the first freeze puts it back on the call list.

Before startup, check the basics:

🔧 Cable condition and mounting along eaves, gutters, and downspouts
⚡ Continuity and insulation resistance, following manufacturer procedures
🌡️ Sensor and controller operation
📊 Current draw compared with the system rating

Contractors: what do you check first at startup? And what heat-trace issue has caused callbacks on your jobs? Share it below.

Address

10000 Twin Lakes Parkway, Suite B
Charlotte, NC
28269

Alerts

Be the first to know and let us send you an email when SERVCON posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SERVCON:

Shortcuts

Share

Nearby realtors & realty services